Horizontal steam boiler structure
The horizontal internal combustion boiler has a large-diameter shell, in which a furnace is arranged, and the burner is placed in the furnace to form an internal combustion chamber. Both ends of the furnace are respectively connected with the front and rear tube plates, and the smoke tube is arranged between the front and rear tube plates, so there is no need for bricklaying walls outside the boiler. The structure is mainly composed of boiler shell, furnace, f...
The higher heating value of natural gas refers to the total heat released when a specified amount of natural gas is completely burned, including the latent heat of vaporization released by the condensation of water vapor in flue gas into water.
The lower heating value of natural gas refers to the heat released when a specified amount of gas is completely burned, the temperature of combustion products is the same as the initial temperature of natural gas, and the generated steam remains ...
There are many valves commonly used in atmospheric gas-fired boilers, including gate valves and stop valves of main steam valves, water supply valves, check valves, exhaust valves, etc.
When the water pump is turned on, the pressure signal is transmitted to the on-off valve of the atmospheric gas-fired boiler through the pressure pipe, the valve is opened, and the water circulation is carried out. When the water pump stops, the pressure drops, and the on-off valve is closed slowly to av...
During the operation of automatic boiler water softener, the role of salt is to backwash sodium ion resin to prevent the sodium ion resin from being poisoned by iron, so the salt will not be destroyed during operation. Pay close attention to the salt content in the salt tank. As long as the salt is continuous, there is no requirement for the salt content. However, for good control, the amount of salt is generally about two-thirds of the salt tank, and then filled with water.
Fully premixed low nitrogen condensing boiler refers to a boiler using fully premixed combustion technology. Fully premixed combustion refers to a combustion mode in which natural gas is fully mixed with air according to a certain proportion before combustion and air is no longer needed to be supplied during combustion.
The difference between ordinary gas-fired boiler and fully premixed low-nitrogen condensing boiler lies in whether air and natural gas are mixed before or after entering the burner.
Boiler safety accessories are indispensable parts of boiler operation, mainly refer to accessories such as pressure gauge, water level gauge, safety valve, steam-water valve, sewage valve, etc. These accessories are extremely important to the safe operation of boilers, especially pressure gauges, water level gauges and safety valves, which are the basic accessories for ensuring the safe operation of boilers. Therefore, they are often referred to as three safety accessories of industrial boilers.
Reasonable arrangement of igniters in gas-fired boiler can not only obtain ideal ignition effect, but also save ignition fuel. However, due to the different types of fuel and burner, the igniter arrangement of gas boilers is different.
