The natural gas testing of the boiler is to measure various thermal performance parameters of the boiler in a stable working condition (that is, in a normal combustion state), so as to judge the energy efficiency of the boiler. Natural gas testing can determine the thermal efficiency of the boiler, determine the size of each heat loss of the boiler, analyze the causes of each heat loss and seek ways to reduce the heat loss, so as to improve the energy efficiency of the boiler. What is the testin...
There are many factors that affect the safe operation of the boiler, including the boiler feed water. Adopting the boiler water supply system that meets the standard can avoid some failures and ensure the service life of the boiler. Focusing on boiler industry for more than 30 years, ZOZEN Boiler has accumulated rich project experience, and summarized some auxiliary equipment mainly included in boiler water supply system, hoping to be helpful to everyone.
Boiler water supply system main...
Before degassing and dehydration, boiler parts must be checked, and detailed inspection items are as follows:
1.Burners work well, combustion is stable and combustion load change can be controlled freely.
2.Auxiliary such as FD fan, ID fan, oil system equipment and so on shall do cold test and run normally.
3.Lubricating oil shall be full filled in all bearing boxes and oil cups.
4.Inspection of safety accessories and protective equipment:
a) The needle valve or the stop valve in the pressu...
Tap water or water with a lot of impurities will cause the magnesium ions and calcium ions in the water to form some white precipitates when heated at high temperature, causing scaling problems and reducing the heat transfer efficiency of the boiler. Boiler operation safety brings hidden dangers, even shutdown.
The specific reason why softened water must be used in hot-water boilers is that it will not produce scale in the process of use, so that potential safety hazards of boilers can ...
The main working principle of industry is a kind of heating equipment which uses the heat energy released after fuel combustion or the waste heat in industrial production to transfer to the medium in the container, so that the medium can reach the required temperature, and then it can be transported to the heating process for heat exchange. According to different media, boilers can be divided into many types.
Types of boiler heating medium
1. Steam, steam boiler and superheated steam b...
The circulating pressure of a thermal oil boiler is generated by the driving of the circulating oil pump to the thermal oil circulation. Generally, the working pressure of the thermal oil pump is 4 ~ 8kg / cm2. Actually, the pressure of the thermal oil pump differs from different working conditions.
What are the factors that affect the maximum pressure of thermal oil heater?
1. Pressure of circulating hot oil pump
The pressure of liqu...
Industrial boiler is an important thermal power equipment, but in recent years, due to large emissions and serious pollution, substandard industrial boilers have become the focus of governance. Biomass pellet boiler is popularized because of its green, low-carbon and clean economy. The thermal efficiency of biomass pellet boiler is related to the economic benefits of enterprises, and users pay special attention to it. What is the thermal efficiency of biomass pellet boiler?
Thermal effi...
Industry boiler is an important thermal power device, which is widely used in factory power, building heating, people's life and other aspects, with a large demand and a wide variety. According to the different flue gas passes, gas-fired boilers are divided into two-pass and three-pass boiler structures. Here, ZOZEN Boiler focuses on the structure and process principle of the common three-pass boiler.
The first pass: after the fuel is atomized by the burner, the formed torch is filled i...
