Overheating in the combustion engine of a gas-fired boiler can be caused by several factors. Understanding and addressing these issues is crucial for maintaining the efficiency and longevity of the boiler, as well as for ensuring safety. Here are some common causes of overheating in the combustion engine of a gas-fired boiler:
Insufficient Water Flow: If there isn't enough water flowing through the boiler, it can't absorb enough heat from the combustion process, leading to overheating. This cou...
Drying the moisture in the fuel of a biomass-fired boiler is important to ensure efficient combustion and prevent issues such as fuel bridging, clumping, and poor boiler performance. Here are some methods that can be used to dry the moisture in biomass fuel:
1. Sun drying: This method involves spreading the biomass fuel, such as wood chips or sawdust, in a thin layer in a sunny, well-ventilated area. The sun's heat and wind will help to evaporate the moisture in the fuel.
2. Fo...
Boiler economizers are devices that help to improve the efficiency of industrial boilers by recovering heat from the flue gas and transferring it to the boiler feedwater. In this article, we will explore how boiler economizers work and the benefits they offer. We will also introduce ZOZEN's boiler and economizer solutions that can help improve the energy efficiency of your industrial operations.
How Do Boiler Economizers Work?
A boiler economizer is essentially a heat exchanger that recovers w...
As we all know, the transportation cost is generally related to the weight of the boiler, so how much does a 4-ton boiler weigh? How much steel does it contain? According to the fuel, 4-ton boilers are divided into 4-ton gas-fired boilers and 4-ton coal-fired and biomass-fired boilers. The amount of steel used for small-scale coal-fired and biomass-fired boilers is generally 5-7 times of the boiler output (excluding the front and rear arches), and about 25 tons for 4-ton boilers.
1) The insufficient heating surface. In the process of retrofit design or improvement, increase the heating surface.
2) The particle size of the fuel is large, the screening characteristics do not meet the requirements, the material concentration in the suspension section is low, and the heat transfer coefficient is small, which makes the output unable to go up, or shows that the bed temperature is high and coal cannot be added. The solution is to improve the fuel preparation system and control...
The first technical problem is the reconstruction of boiler body:
The coal-fired boiler is mainly grate firing boiler. For small water-tube hot-water boilers, it may lead to the water temperature at the outlet of the riser exceeding the limit or overheating boiling or even vaporization. For shell-and-tube boilers, the rising flue gas temperature at the furnace outlet will make the working conditions of the tube plate worse, thus causing cracks and leakage of the tube plate.
In recent years, with the continuous development of new energy technology, China's energy utilization mode has changed from a single form in the past to various forms now. As a green fuel energy, natural gas is widely praised by all levels of society and widely developed and used. Therefore, gas-fired boilers have also become popular boiler equipment in contemporary society.
As a kind of equipment that needs to be used continuously for a long time, it is quite common for the boiler to malfunction due to operation errors or environmental quality problems. Today, Let’s discuss the causes, analysis and solutions of common faults of steam boilers.
