All boiler pipes have been installed and passed the hydrostatic test.
The furnace wall masonry and insulation work have all ended and has been qualified.
The flue gas duct has been installed and insulated, and the induced draft fan has been installed and debugged to be qualified and can be put into operation.
All the thermal and electrical instruments required for boiler drying have been installed and verified to be qualified.
Mortar samples have been placed on both sides of the middle par...
A 10 tph boiler does not mean that the dead weight of the boiler is 10 tons. The ton of the 10 tph boiler is the heat load unit of the boiler, which is used in engineering, indicating that the rated evaporation capacity of the boiler is 10 t/h.
The type and parameters of coal-fired boilers are the direct factors affecting the cost of a small coal-fired boiler. For example, rated capacity, rated steam pressure, rated steam temperature, feed water temperature, etc. With different parameters, the more requirements, the higher the price.
With the rapid development of economy, the demand for industrial boilers in modern enterprises is increasing. Because of the particularity and complexity of industrial boilers, we must understand the problems clearly before purchasing. According to the question "what is the main function of boiler superheater", ZOZEN Boiler will answer the doubts first.
A steam generator is a mechanical equipment that uses the heat energy of fuel or other energy resources to heat water into hot water or steam. It belongs to small equipment and is a kind of steam boiler. According to Boiler Safety Technical Inspection Regulations, a boiler whose water volume exceeds 30 litres belongs to pressure container, national special equipment. There is no need of water storage in the internal structure of modular steam generator concurrent pipeline and the water volume is...
EPA has promulgated national emission standards for hazardous air pollutants from three major source categories: Industrial boilers, commercial and institutional boilers, and process heaters. The final emission standards for control of mercury, hydrogen chloride, particulate matter (as a surrogate for non-mercury metals), and carbon monoxide (as a surrogate for organic hazardous emissions) from coal-fired, biomass-fired, and liquid-fired major source boilers are based on the maximum achievable control technology. In addition, all major source boilers and process heaters are subject to a work practice standard to periodically conduct tune-ups of the boiler or process heater.
The ASME Boiler & Pressure Vessel Code (BPVC) is an American Society of Mechanical Engineers (ASME) standard that regulates the design and construction of boilers and pressure vessels.
The construction and working principle of the boiler economizer is simple. At the bottom part, it has a horizontal inlet pipe through which we feed water with normal temperature to the economizer. There is another horizontal pipe fitted at the top of the economizer.
