As an important heat energy supply equipment, industrial boiler is widely used in food, electronics, paper making, building materials, textiles and chemical industries. According to the medium, industrial boilers can be divided into steam boilers, hot water boilers and thermal oil heaters. In order to solve the problem "How many tons are the rated thermal power of 42 MW of industrial boiler?" First of all, we need to know the basic knowledge of rated thermal power and unit ton.
In the dairy industry, an efficient steam boiler is quite necessary to the dairy production process. The dairy steam boiler is critical milk processing equipment to transfer the raw milk to the high-quality of dairy products. Therefore, choosing a good dairy steam boiler is one of the most important decisions a dairy plant must make.
When you choose the dairy steam boiler, the first thing you shall pay attention to is the boiler shall meet the fluctuating load demands. Second, the boile...
Water treatment outside the boiler
Before entering the boiler, raw water is treated with water treatment equipment to remove impurities such as hardness, salinity, dissolved oxygen, etc., so that the feed water can meet the water quality requirements specified by steam boiler. Common water treatment equipment includes sodium ion exchange water softening equipment, ion exchange desalination equipment, reverse osmosis water purification equipment and thermal oxygen removal equipment.
...
A steam generator is a mechanical equipment that uses the heat energy of fuel or other energy resources to heat water into hot water or steam. It belongs to small equipment and is a kind of steam boiler. According to Boiler Safety Technical Inspection Regulations, a boiler whose water volume exceeds 30 litres belongs to pressure container, national special equipment. There is no need of water storage in the internal structure of modular steam generator concurrent pipeline and the water volume is...
The key difference between vapor and steam is that vapor is a generally used term while steam is the technical and specific term. A shared attribute between vapor and steam is the point of origin or how it is formed. Steam and other kinds of vapor are often made by evaporation or with other means or application of heat.
There are many challenges and demands faced during the food processing, the choice of a steam boiler can make great difference in a company’s production. So, there are some tips for you to choose a steam boiler for a food processing facility.
The primary use of steam boiler in tire manufacturing is the vulcanizing process — the curing of the rubber needs steam to provide heat energy. Curing is a process in which chemical or physical action takes place for harder, tougher and more stable linkage.
As we know tires are the most important part of our vehicle because in all the parts of vehicle tires only remain in contact with the earth hence tires carry all the load of vehicle and passengers.
Vulcanization is a p...
Combustion is a process which needs constant air supply for its survival, but as we move up the earth i.e. at higher altitudes, things aren’t the same as they used to be at sea level. Due to decreased air density at higher altitude, it will consume the same volume of air but will not consume the same mass of air.
This results in less fuel consumption & less steam generation rate. Due to the reduction of mass flow of gases through tubes of a steam boiler, convective heat transf...
