MFT means the main fuel trip. To put it simply, when the protection signal is activated, the control system automatically cuts off the boiler fuel system and links the corresponding systems and equipment, so that the whole thermal system can be safely shut down, the boiler can be protected, and the fault can be prevented from further expanding.
Water treatment outside the boiler
Before entering the boiler, raw water is treated with water treatment equipment to remove impurities such as hardness, salinity, dissolved oxygen, etc., so that the feed water can meet the water quality requirements specified by steam boiler. Common water treatment equipment includes sodium ion exchange water softening equipment, ion exchange desalination equipment, reverse osmosis water purification equipment and thermal oxygen removal equipment.
...
A steam generator is a mechanical equipment that uses the heat energy of fuel or other energy resources to heat water into hot water or steam. It belongs to small equipment and is a kind of steam boiler. According to Boiler Safety Technical Inspection Regulations, a boiler whose water volume exceeds 30 litres belongs to pressure container, national special equipment. There is no need of water storage in the internal structure of modular steam generator concurrent pipeline and the water volume is...
According to the Wikipedia, fuel oil (also known as heavy oil, marine fuel, bunker, furnace oil, or gasoil) is a fraction obtained from petroleum distillation. It includes distillates - the lighter fractions, and residues - the heavier fractions.
The term fuel oil generally includes any liquid fuel that is burned in a furnace or boiler to generate heat, or used in an engine to generate power.
There are many challenges and demands faced during the food processing, the choice of a steam boiler can make great difference in a company’s production. So, there are some tips for you to choose a steam boiler for a food processing facility.
Water quality is of the utmost importance in proper and safe boiler operations. An improperly treated feedwater system can result in the scaling of the boiler internals, safety equipment and auxiliary piping.
A condensing boiler can condense the water vapour in the flue gases and withstand the corrosive and acidic qualities of the flue gas condensate. Although most boilers can condense the flue gasses, only boilers that have heat exchangers constructed from materials able to withstand the corrosion should be used in condensing application. Condensing boilers with primary and secondary heat exchanger do not work well as they are not able to fully condense and defeat the purpose of using a condensing boiler. Also, boilers with this arrangement are prone to condensation in the primary heat exchanger at lower firing rate which can cause damage to the heat exchanger.
