In recent years, the rapid growth of the total number of industrial boilers has increasingly highlighted the shortcomings of low energy consumption of industrial boilers. Realizing energy conservation and emission reduction is an important challenge in the use of industrial boilers in China at this stage.
Based on advanced technology and experience at home and abroad, ZOZEN Boiler has developed a variety of new energy-saving steam boilers, including WNS series oil-gas energy-saving steam boilers, SZS series oil-gas energy-saving chinese steam boilers and SZL series biomass energy-saving chinese steam boilers.
Product thermal capacity: 6-35 t/h
Working pressure: 1-2.5 MPa
Product thermal capacity: 20-130 t/h
Working pressure: 3.82, 5.29 MPa
Product thermal capacity: 10-35 t/h
Working pressure: 1.25-2.5 MPa
Product thermal capacity: 20-75 t/h
Working pressure: 1.25-5.4 MPa
The working principle of steam boiler is to heat water by burning fuel to generate steam. Because of its more powerful function and more stable performance, energy-saving steam boilers are widely used in industrial production lines to provide heat sources, mainly including chemical industry, building materials, textiles, pharmaceuticals, food and other industries.
Compared with the traditional steam boiler, the energy-saving steam boiler produced by ZOZEN has unique advantages in energy saving, environmental protection and ensuring the safety of steam supply system. It can adapt to a variety of fuels such as gas and solid, adopt advanced combustion methods to ensure the full combustion of fuel, and the boiler system has sufficient output and high thermal efficiency.
1, whether the fuel combustion is complete.
For an energy-saving chinese steam boiler, the combustion of fuel in the furnace is very full and the combustion efficiency is high. Under the condition of the same other parameters, if the same amount of water is heated to a certain temperature, the amount of fuel consumed by the boiler with high combustion efficiency is far lower than that of the boiler with low efficiency, which reduces the fuel cost to a certain extent and has remarkable energy-saving effect.
2. Is the exhaust temperature high?
For energy-saving chinese steam boilers, the flue gas emission temperature after fuel combustion should not be too high. Once the temperature of the discharged flue gas is too high, it means that all the released heat is not supplied to the water in the boiler, and the heat is directly discharged into the air as waste gas. Therefore, the high exhaust temperature of the boiler indicates that the thermal efficiency of the boiler is low and the energy saving effect is not good.
1. Boiler waste heat recovery and energy saving: For boilers with high exhaust gas temperature (generally exceeding 180°C), the exhaust gas temperature of the boiler is reduced or the boiler sewage and condensate water are recovered by increasing the tail heating surface, so as to achieve the purpose of energy saving.
2. Water quality control and energy saving: through the boiler feed water treatment, control the boiler feed water quality, prevent the boiler from scaling, and make the boiler run without scale or thin scale, so as to achieve the purpose of energy saving.
3. Energy-saving in boiler operation management: By means of boiler load adjustment, automatic control technology, combustion adjustment, regular ash cleaning and slag cleaning, each boiler is in a better economic operation state, thus achieving the purpose of energy saving.
35s
28s
34s+8613506150756
info@zozen.com
0086-510-68530299
