As a kind of equipment that needs to be used continuously for a long time, it is quite common for the boiler to malfunction due to operation errors or environmental quality problems. Today, Let’s discuss the causes, analysis and solutions of common faults of steam boilers.
Coking and dust accumulation on heating surface. Whether it is slagging and ash deposition on the water wall of the furnace or ash deposition on the superheater, convection tube bundle, economizer and preheater, the measured thermal resistance of flue gas will increase, and the deterioration of heat transfer will worsen the cooling effect of flue gas, resulting in an increase in the temperature of boiler waste gas.
According to the characteristics of biomass fuel, the biomass boiler produced by ZOZEN Boiler has been specially designed in structure, which has taken the lead in solving the problems such as furnace arch collapse, furnace door burn-out, hopper fire and stopper coking.
The boiler water film dust remover uses dust-containing gas to impact the inner wall of the dust remover or other special components, and forms a water film in some way, so that the dust in the flue gas is captured by the water film, thus purifying the gas.
The ignition system of gas-fired boiler adopts high-energy igniter, which belongs to low-voltage capacitive discharge device. Its main structure is composed of nddh high-energy igniter, nddz igniter and nddl shielded ignition cable.
The ignition of industrial coal-fired boiler needs to be operated steps by steps, and the ignition operation is different according to the specific model of industrial coal-fired boiler. Grates of industrial coal-fired boilers are usually divided into manual grates and mechanical grates. Here, according to the different grates, the correct ignition steps of industrial coal-fired boilers are introduced in detail.
Water treatment outside the boiler
Before entering the boiler, raw water is treated with water treatment equipment to remove impurities such as hardness, salinity, dissolved oxygen, etc., so that the feed water can meet the water quality requirements specified by steam boiler. Common water treatment equipment includes sodium ion exchange water softening equipment, ion exchange desalination equipment, reverse osmosis water purification equipment and thermal oxygen removal equipment.
...
Steam is very widely applied in the textile industry. It is commonly used in many subsectors and processes: manufacturing fabrics, manufacturing textile products…
