Every customer is concerned about the service life of products he purchases. Extending the service life of thermal oil heater is helpful for reducing customer’s costs and increasing profits. Different existing thermal oil heaters on the market have different service years.
According to the differences in fuel and structure, industrial thermal oil heaters are mainly divided into the oil/gas-fired thermal oil heater and coal/biomass-fired thermal oil heater. The basic configurations of the thermal oil boiler system generally are as follows.
The YLW biomass organic heat carrier furnace is a high-efficiency energy-saving heating equipment that uses biomass as fuel. It operates with heat transfer oil as the medium, capable of providing thermal energy up to 350℃ at relatively low pressures. This furnace is suitable for a variety of industrial heating and drying processes, known for its high thermal efficiency, easy operation, convenient installation and mobility, and excellent environmental performance.
Operation of ZOZEN ...
The performance parameters of a 6-ton chain grate boiler provide insight into its efficiency, safety, and operational characteristics. Here are the key parameters typically associated with a 6-ton chain grate boiler:
Rated Steam Capacity: For our topic, this is 6 tons. It indicates the amount of steam the boiler can produce per hour when it's operating at its maximum load.
Operating Pressure: This parameter defines the pressure at which the boiler operates, typically given in bar, psi, or MPa....
Dealing with abnormalities in the circulating pump of a thermal oil heater involves several steps, aimed at identifying the issue and applying the appropriate corrective measures. Here’s a general approach:
1. Identify the Symptom: Common abnormalities include unusual noises, overheating, reduced flow rate, leakage, or vibration. Understanding the symptom helps in pinpointing the underlying issue.
2. Check Electrical Components: Inspect electrical connections, fuses, and the motor for an...
The design and construction of boiler room is also a very important point in the safe use of boiler. The gas supply, combustion, inspection and other items of the boiler should also comply with the boiler room design code. As many users have consulted the question whether pressure boilers can be installed in the basement, ZOZEN Boiler here will give you a professional answer.
Can the pressure-bearing boiler be set in the basement? It is necessary to refer to the relevant design codes of...
Before degassing and dehydration, boiler parts must be checked, and detailed inspection items are as follows:
1.Burners work well, combustion is stable and combustion load change can be controlled freely.
2.Auxiliary such as FD fan, ID fan, oil system equipment and so on shall do cold test and run normally.
3.Lubricating oil shall be full filled in all bearing boxes and oil cups.
4.Inspection of safety accessories and protective equipment:
a) The needle valve or the stop valve in the pressu...
