The so-called tower boiler refers to a boiler with a furnace at the lower part and a convection flue at the upper part. The features of domestic tower and tanks include the following aspects.
The heat requirements of the building materials manufacturing process are very varied. A steam boiler plays a key role in the process of creating building materials. For example, materials like molded brick rely very much on steam heat from an industrial steam boiler in order to pressurize and harden the elements that make up the brick. Without exposure to that kind of heat and pressure, these materials would be a loose construction of sediment, rather than dependable, solid building components....
Water treatment outside the boiler
Before entering the boiler, raw water is treated with water treatment equipment to remove impurities such as hardness, salinity, dissolved oxygen, etc., so that the feed water can meet the water quality requirements specified by steam boiler. Common water treatment equipment includes sodium ion exchange water softening equipment, ion exchange desalination equipment, reverse osmosis water purification equipment and thermal oxygen removal equipment.
...
The quality of the water used to produce the steam in the boiler will have a profound effect on meeting the objectives such as safe operation, maximum combustion and heat transfer efficiency, minimum maintenance and long working life.
Percussive sounds ("banging," "hammering," or "knocking") and vibrations in boiler drums or pipes are serious operational anomalies that demand immediate attention. At ZOZEN, we engineer our coal-fired boilers (like the SZL water-tube and DZL fire-tube series) to minimize these risks, but they can still arise due to operational or system issues. Here are the primary causes and ZOZEN's approach to mitigation:
Common Causes & ZOZEN Solutions:Water Hammer (Steam Condensation Shock):
Cause: Ra...
Question details (Performance):1. High temperature of motor, fast temperature rise.2. Overload, high outlet pressure and frequent safety valve open often.3. The vibration is intensified, the side vibration of the fan motor coupling is large, and the fan body never vibrates to vibration.4. No obvious vibration was found in no-load test of fan motor. Answer: Fault reason:Fan bearing vibration is common fault in the operation, the vibration of the fan will cause damage of bearing and blade, bolt looseness, chassis and wind damage, fan vibration rises abruptly in the operation. this is because when the gas enter impeller and the rotating blade working face has certain angle, according to the principle of fluid mechanics, gas from non-working face must be a spiral blade, so the dust particles in the gas will slowly sedimentation due to vortex. Airfoil blades are very easy to accumulate dust. When the accumulated ash reaches a certain weight, a part of the large amount of accumulated ash wi
Specific performance:Low level alarm of expansion tank.Answer：Cause of failure:The pipeline system (including heater) has not been replenished in time after oil leakage or degassing. Troubleshooting:Eliminate system defects and add oil.
