Boiler feedwater treatment system includes two parts: pre-desalination system and ion exchange desalination system.
The pre-desalination system includes ultrafiltration system, reverse osmosis system, dosing system, chemical cleaning system, compressed air system, etc.
The ion exchange desalination system includes ion exchange system, acid-base regeneration system, compressed air system, wastewater neutralization treatment system, etc.
The boiler feedwater treatment methods ar...
The boiler water film dust remover uses dust-containing gas to impact the inner wall of the dust remover or other special components, and forms a water film in some way, so that the dust in the flue gas is captured by the water film, thus purifying the gas.
Because a certain amount of air is usually dissolved in water, with the increase of temperature, the solubility of air decreases, and the gas is gradually separates from the water in the process of water circulation, and gradually gathers together to form large bubbles and even gas columns. Gas is often produced due to the water supplement, so the boiler exhaust valve must be used to avoid damage to the system.
New energy boiler fuel is a new clean and environmentally friendly fuel product. The fuel of new energy boiler is clean, sanitary, green and environmentally-friendly. No "three wastes" such as waste gas, wastewater and waste residue are discharged in the production process. It has high oxygen content, full incineration, no black smoke, no carbon deposit, no boiler black bottom, no residual liquid or residue. The waste gas from incineration is more than 80% lower than that of LPG.
Boiler water circulation refers to the circulating flow of water and steam-water mixture on the evaporating heating surface of boiler. What is the working principle of the latest water circulation system of boiler?
Deaerator is one of the key equipment in boiler and heating system. With the popularization and development of demineralized water treatment technology, deoxidization of boilers and heating systems becomes more and more important.
The rated output of boiler refers to the maximum sustained output of industrial boiler under rated parameters (pressure and temperature) and certain efficiency. For steam boilers, the rated output is also called rated capacity, and the unit is t/h (tons/hour); For a hot water boiler, the rated output of the boiler is also called the rated thermal output, and its unit is MW.
MFT means the main fuel trip. To put it simply, when the protection signal is activated, the control system automatically cuts off the boiler fuel system and links the corresponding systems and equipment, so that the whole thermal system can be safely shut down, the boiler can be protected, and the fault can be prevented from further expanding.
