The flue gas first enters the cyclone dust collector which acts as a primary dust collector to make the large dust particles in the flue gas settle down. The cyclone dust collector is a dust removal device which uses the centrifugal force generated by the cyclone flow to separate the dust particles from the air flow. Afterwards, the flue gas enters the wet scrubber dust collector which is a circular-type cylinder. The circulating water enters the dust collector from the upper overflow tank to form a uniform water film on the inner wall of the dust collector. The flue gas is induced tangentially or spirally from the lower part of the cylinder and rotates in the cylinder. Under the influence of the centrifugal force, the dust particles are separated from the flue gas and then the flue gas is also spirally led out from the top of the cylinder. The dust particles are thrown to the water film, transferred to the bottom and finally discharged from the dust port.
Boiler is a piece of equipment with large energy consumption. Therefore, both boiler manufacturers and purchasers regard energy conservation as an important indicator of boiler performance. The daily energy-saving measures of the natural gas fired boiler are mainly as follows.
The high heat transfer of the boiler requires good medium. With the improvement of boiler in the production technology and intelligenlization, gas-fired boilers have more strict requirements for boiler operation medium in order to improve the boiler operating performance, reduce boiler failures and costs.
Thermal oil heaters have the characteristics of low pressure and high temperature. They adopt the special manufacturing technology and are equipped with tailor-made flue gas waste heat recovery systems, so they are energy-efficient with higher thermal efficiency than similar products on the market. They also have a high level of automation.
The gas-fired boiler has the wonderful energy-saving effect and environmental protection performance. The energy-saving effect of the gas-fired boiler is realized by many boiler parts.
The thermal oil heater, also called the organic heat carrier boiler, is a kind of once-through boiler developed based on the forced circulation design concept. With gas, oil or coal as the fuel and heat conducting oil as the medium, the thermal oil heater adopts the thermal oil pump to force the medium conducting the circulation in the liquid phase. The medium transfers the heat energy to the heating equipment and then returns to the furnace for being reheated. The thermal oil heater has the advantages of high-temperature and low-pressure heating and precise control of the medium.
Gas-fired hot water boilers require high-quality water to improve the boiler performance and extend the service life. If the boiler uses the tap water of water which contains a lot of impurities, magnesium and calcium ions in the water will form white precipitates when the water is heated at high temperatures, which can cause the scaling problem to reduce the heat transfer efficiency of the boiler and bring hidden dangers of the boiler safety.
The gas-fired boiler has outstanding eco-friendly advantages, which makes it stand out among various boilers. Due to the high efficiency and fuel characteristics, the gas-fired boiler has many protective measures in the operation.
