What are the standards and specifications of organic heat carriers?

Organic heat carrier takes natural gas, oil, biomass and coal as fuel, takes heat-conducting oil as medium, and uses hot oil circulation pump to force the medium to circulate in liquid phase. It transfers the heat energy to the heating equipment and then returns to the heating furnace for reheating. It can obtain high working temperature at low pressure, and can control the medium operation with high precision. In order to strictly control boiler safety, relevant departments have formulated strict standards for organic heat carriers.

See Organic Heat Transfer Material Heaters (GB/T 17410-2008) for the standard of organic heat carrier. This standard specifies the terms and definitions, classification and naming, requirements, test methods, inspection methods, inspection rules, packaging, transportation and storage of organic heat carrier furnaces, and is applicable to fixed organic heat carrier gas-phase furnaces and organic heat carrier liquid-phase furnaces.

ZOZEN Boiler strictly follows the standard of organic heat carrier

As one of the professional manufacturers in heat conduction oil furnace, ZOZEN Boiler produces oil-fired gas-fired heat-conducting oil boilers and coal/biomass heat-conducting oil boilers, with a capacity of 1.2-25 million kcal, a working temperature of 320℃ and a thermal efficiency of over 95%. According to heat conduction oil furnace standard of organic heat carrier, ZOZEN boiler has formulated standardized operation flow and strict quality inspection to ensure the quality of boiler from the source.

1. Energy saving and environmental protection. ZOZEN Boiler has made in-depth research on low-nitrogen combustion technology. The gas-fired heat-transfer oil boiler produced by ZOZEN Boiler can adopt low-nitrogen burner, and the emission of nitrogen oxides does not exceed 30mg/Nm³, meeting the emission standards of boilers in key areas at present.

2. Around the body and the front and rear (or upper and lower) door covers, our company designs fire-resistant insulation structures with different thicknesses according to different temperature areas, so that the external temperature is better than GB standard requirements.

3. The supporting equipment at the rear of the furnace body includes waste heat boiler, economizer, air preheater, steam generator, heat-conducting oil and flue gas integrated waste heat boiler, etc. Customers can choose appropriate supporting equipment according to their own process characteristics.

4. Greatly reduce the oil boiling time on site, with high heat transfer efficiency and stable output.

5. Fully automatic operation is achieved, and the actual utilization rate of heat energy is maximized.

6. Safety accessories are complete. All necessary safety devices such as temperature measurement, pressure measurement, nitrogen filling, etc. are designed and installed on the furnace body and oil inlet and outlet pipelines, and special procedures for boiling oil are designed in the control program to ensure safe use.